1. .net Framework 3.5.1 For Windows 7
2. Netcad 5.1 Windows 7 Kurulum
3. Skype 5.1 For Windows

I used to use netcat for Windows to help track down network connectivity issues. However these days my anti-virus software (Symantec - but I understand others display similar behaviour) quarantines netcat.exe as malware.

Are there any alternative applications which provide at least the following functionality:

• can connect to an open TCP socket and send data to it which is typed on the console
• can open and listen on a TCP socket and print received data to the console

?

Netcat 1.11 for Windows (32-bit build, works on 64-bit too). The -e option is not enabled. Mar 24, 2018 - Netcad 5 1 windows 7 32 bit crack indir Bizi Takip Eder misiniz! The following versions: 6.0, 5.2 and 5.1 are the most frequently downloaded. Windows ports. Here's netcat 1.11 compiled for both 32 and 64-bit Windows (but note that 64-bit version hasn't been tested much - use at your own risk).

I don't need the 'advanced' features (which are possibly the reason for the quarantining) such as port scanning or remote execution.

closed as off-topic by Ramhound, Ƭᴇcʜιᴇ007, DavidPostill♦, Twisty Impersonator, 3498DBOct 30 '16 at 5:20

This question appears to be off-topic. The users who voted to close gave this specific reason:

• 'Questions seeking product, service, or learning material recommendations are off-topic because they become outdated quickly and attract opinion-based answers. Instead, describe your situation and the specific problem you're trying to solve. Share your research. Here are a few suggestions on how to properly ask this type of question.' – Ramhound, Ƭᴇcʜιᴇ007, DavidPostill, Twisty Impersonator, 3498DB

8 Answers

This person ran into the exact same problem; read till the end for the version compiled without remote execution. I downloaded and extracted these on two systems running 'Symantec Endpoint Protection'. While the netcat on this page was removed and quarantined when run, the 'rodneybeede' version linked to near the end of the page tried to connect to the desired port, and wasn't quarantined.

ncat seems to be exactly what you're looking for. It's an implementation of netcat available on the official Nmap site with the port scanning feature removed. Doesn't raise any virus alerts either.

From the 'Ncat Users' Guide':

Ncat is our modern reinvention of the venerable Netcat (nc) tool released by Hobbit in 1996. While Ncat is similar to Netcat in spirit, they don't share any source code. Instead, Ncat makes use of Nmap's well optimized and tested networking libraries. Compatibility with the original Netcat and some well known variants is maintained where it doesn't conflict with Ncat's enhancements or cause usability problems. Ncat adds many capabilities not found in Hobbit's original nc, including SSL support, proxy connections, IPv6, and connection brokering. The original nc contained a simple port scanner, but we omitted that from Ncat because we have a preferred tool for that function.

The quick answer here is to use the built in Telnet program from the CMD command line.

the command is..

The above example will connect you to the hostname on port 80. you can use it on just about any port you need to check out. This is extremely handy for troubleshooting SMTP and ESMTP issues.

I discovered that MobaXterm for Windows has the nc (netcat) command, as well as many other Unix commands, like ls, ps, and kill.

I wholeheartedly recommend MobaXterm, especially if you are familiar with both Unix and DOS. For me, there was nothing to install; it's just one executable that opens a terminal window in Windows that accepts many Unix commands. Since I frequently use both Unix and DOS and often use one to connect to the other, MobaXterm for Windows is an extremely useful tool for me.

(Sorry if this sounds like an advertisement; I don't work for nor am I affiliated with MobaXterm. A friend recently introduced it to me and it made certain tasks so much easier for me.)

If you need netcat, you can whitelist netcat.exe in your anti-virus program.

You may also want to download a current version, which is called ncat and can be found in the nmap distribution.

Even if it seems otherwise, Wireshark is easy to use. You can setup it easily to listen to a specific port.

Another tool is nmap which again, I find easy to use. It will tell you much about open ports on a remote machine, so you can use it troubleshoot connectivity issues. Just nmap www.google.com from command line, or from included gui interface.

Just give them a try.

You can download Ncat - Netcat for the 21st Century.It seems to be a modern version of NCat, it is actively supported, and, most important, it had a 0/48 detection ratio at VirusTotal.

Portable version or from NMap Windows installer - disable anything else from the install wizard:

There is now also separate 'ncat' static build available at http://nmap.org/dist/ncat-portable-5.59BETA1.zip

Not the answer you're looking for? Browse other questions tagged windowsnetworking or ask your own question.

netcat (often abbreviated to nc) is a computer networking utility for reading from and writing to network connections using TCP or UDP. The command is designed to be a dependable back-end that can be used directly or easily driven by other programs and scripts. At the same time, it is a feature-rich network debugging and investigation tool, since it can produce almost any kind of connection its user could need and has a number of built-in capabilities.

Its list of features includes port scanning, transferring files, and port listening, and it can be used as a backdoor.

• 2Examples
• 3ncat: A similar tool to netcat provided by nmap suite

.net Framework 3.5.1 For Windows 7

Features[edit]

The original netcat's features include:^[2]

• Outbound or inbound connections, TCP or UDP, to or from any ports
• Full DNS forward/reverse checking, with appropriate warnings
• Ability to use any local source port
• Ability to use any locally configured network source address
• Built-in port-scanning capabilities, with randomization
• Built-in loose source-routing capability
• Can read command line arguments from standard input
• Slow-send mode, one line every N seconds
• Hex dump of transmitted and received data
• Optional ability to let another program service establish connections
• Optional telnet-options responder
• Featured tunneling mode which permits user-defined tunneling, e.g., UDP or TCP, with the possibility of specifying all network parameters (source port/interface, listening port/interface, and the remote host allowed to connect to the tunnel).

Rewrites like GNU's and OpenBSD's support additional features. For example, OpenBSD's nc supports TLS.

Examples[edit]

Opening a raw connection to port 25 (like )[edit]

Performing an HTTP request[edit]

The full response (including HTTP headers) will be dumped to standard output.

Setting up a one-shot webserver on port 8080 to present the content of a file[edit]

The file can then be accessed via a web browser under http://servername:8080/. Netcat only serves the file once to the first client that connects and then exits; it also provides the content length for browsers that expect it. (This should work fine in a LAN, but may potentially fail with any kind of firewall between.). In some versions of netcat like netcat-traditional in Debian 8.6, you need to specify -p before the port number.

Checking whether UDP ports (-u) 80–90 are open on 192.168.0.1 using zero mode I/O (-z)[edit]

Note that UDP tests will always show as 'open'.

Test whether UDP port is open: simple UDP server and client[edit]

This test is useful, if you have shell access to the server that should be tested, but you do not know whether there is a firewall blocking a specific UDP port on the server.

On the listening host, i.e. on the server whose port needs to be checked, do the following:

On the sending host, do the following – note that servname is the hostname of the listening host:

If text typed on the sending host (type something and hit enter) is displayed also on the listening host, then the UDP port 4172 is open. If it is not open, you will get an error such as 'Connection refused'.

There is a caveat. On some machines, IPv6 may be the default IP version to use by netcat. Thus, the host specified by the hostname is contacted using IPv6, and the user might not know about this. Ports may appear closed in the test, even though they would be open when using IPv4. This can be difficult to notice and may cause the false impression that the port is blocked, while it is actually open. You can force the use of IPv4 by using adding -4 to the options of the nc commands.

Pipe via UDP (-u) with a wait time (-w) of 1 second to 'loggerhost' on port 514[edit]

Port scanning[edit]

An uncommon use of netcat is port scanning. Netcat is not considered the best tool for this job, but it can be sufficient (a more advanced tool is nmap)

The -n parameter here prevents DNS lookup, -z makes nc not receive any data from the server, and -w 1 makes the connection timeout after 1 second of inactivity.

Proxying[edit]

Another useful behaviour is using netcat as a proxy. Both ports and hosts can be redirected. Look at this example:

Port 12345 represents the request.

This starts a nc server on port 12345 and all the connections get redirected to google.com:80. If a web browser makes a request to nc, the request will be sent to google but the response will not be sent to the web browser. That is because pipes are unidirectional. This can be worked around with a named pipe to redirect the input and output.

The -c option may also be used with the ncat implementation:^[3]

Using a named pipe is a more reliable method because using -c option provides only a one-shot proxy.

Another useful feature is to proxy SSL connections. This way, the traffic can not be viewed in wire sniffing applications such as wireshark. This can be accomplished on UNIXes by utilizing mkfifo, netcat, and openssl.

Making any process a server[edit]

netcat can be used to make any process a network server. It can listen on a port and pipe the input it receives to that process.

The -eSouth central cartel discography torrent. option spawns the executable with its input and output redirected via network socket.

For example, it is possible to expose a bourne shell process to remote computers.

To do so, on a computer A with IP address 192.168.1.2, run this command:

Then, from any other computer on the same network, one could run this nc command:

In this way, the -e option can be used to create a rudimentary backdoor. Some administrators perceive this as a risk and thus do not allow netcat on a computer.

ncat: A similar tool to netcat provided by nmap suite[edit]

'While Ncat isn't built on any code from the “traditional” Netcat (or any other implementation), Ncat is most definitely based on Netcat in spirit and functionality.'^[4]

Netcad 5.1 Windows 7 Kurulum

• Connect to example.org on TCP port 8080. : ncat example.org 8080
• Listen for connections on TCP port 8080. : ncat -l 8080
• Redirect TCP port 8080 on the local machine to host on port 80. : ncat --sh-exec 'ncat example.org 80' -l 8080 --keep-open
• Bind to TCP port 8081 and attach /bin/bash for the world to access freely. : ncat --exec '/bin/bash' -l 8081 --keep-open
• Bind a shell to TCP port 8081, limit access to hosts on a local network, and limit the maximum number of simultaneous connections to 3:

• Connect to smtphost:25 through a SOCKS4 server on port 1080: ncat --proxy socks4host --proxy-type socks4 --proxy-auth user smtphost 25
• Create an HTTP proxy server on localhost port 8888. : ncat -l --proxy-type http localhost 8888
• Send a file over TCP port 9899 from host2 (client) to host1 (server).
• Transfer in the other direction, turning Ncat into a “one file” server.

Encrypted file transfer^[5][edit]

Suppose you have an SSH tunnel, and you want to copy a file to the remote machine. You could just scp it directly, but that opens up another connection. The goal is to re-use the existing connection. You can use netcat to do this:

When you SSH in, add in -L 31000:127.0.0.1:31000 (this is port forwarding, sending everything from port 31000 on the remote machine to the same port on the local machine)

• On the remote: ncat -lvnp 31000 127.0.0.1 > file
• On the local: ncat -v -w 2 127.0.0.1 31000 < file

No extra overhead. TCP takes care of error correction. SSH has already encrypted the pipe.

Ports and reimplementations[edit]

The original version of netcat was a Unix program. The last version (1.10) was released in March 1996.^[2]

There are several implementations on POSIX systems, including rewrites from scratch like GNU netcat^[6] or OpenBSD netcat,^[7] the latter of which supports IPv6 and TLS. The OpenBSD version has been ported to the FreeBSD base^[8] and Windows/Cygwin.^[9]Mac OS X comes with netcat installed as of OSX 10.13 or users can use MacPorts to install a variant.^[10]

A DOS version of netcat called NTOOL is included in the FreeDOS Package group Networking.^[11] It is based on the WatTCP stack and licensed under the European Union Public Licence Version 1.1.^[12]

There is also a Microsoft Windows version of netcat available.^[13]

Known ports for embedded systems includes versions for Windows CE (named 'Netcat 4 wince'^[14]) or for the iPhone.^[15]

BusyBox includes by default a lightweight version of netcat.

Solaris 11 includes netcat implementation based on OpenBSD netcat.

Socat^[16] is a more complex variant of netcat. It is larger and more flexible and has more options that must be configured for a given task. On February 1, 2016, Santiago Zanella-Beguelin and Microsoft Vulnerability Research issued a security advisory regarding a compositeDiffie-Hellman parameter which had been hard-coded into the OpenSSL implementation of socat.^[17]The implausibility that a composite might have been unintentionally introduced where a prime number is required has led to the suspicion of sabotage to introduce a backdoorsoftware vulnerability.^[18]This socat bug affected version 1.7.3.0 and 2.0.0-b8 it was corrected in following releases from 1.7.3.1 and 2.0.0-b9.^[19]

Skype 5.1 For Windows

Cryptcat^[20] is a version of netcat with integrated transport encryption capabilities.

In the middle of 2005, Nmap announced another netcat incarnation called Ncat.^[21] It features new possibilities such as 'Connection Brokering', TCP/UDP Redirection, SOCKS4 client and server support, ability to 'Chain' Ncat processes, HTTP CONNECT proxying (and proxy chaining), SSL connect/listen support and IP address/connection filtering. Like Nmap, Ncat is cross-platform.

On some systems, modified versions or similar netcat utilities go by the command name(s) nc, ncat, pnetcat, socat, sock, socket, sbd.

See also[edit]

References[edit]

1. ^https://seclists.org/bugtraq/1995/Oct/28
2. ^ ^ab'Netcat 1.10'. Nc110.sourceforge.net. 2008-02-14. Retrieved 2013-08-11.
3. ^'Ncat Command Execution'. Nmap.org. Retrieved 2013-12-01.
4. ^'ncat(1) — nmap — Debian testing — Debian Manpages'. manpages.debian.org. Retrieved 2018-03-25.
5. ^courtesy of [emailto:tom@buskey.name Tom Buskey]
6. ^Giovanni Giacobbi (2006-11-01). 'The GNU Netcat project'. Retrieved 2013-08-11.
7. ^'OpenBSD CVSWeb: src/usr.bin/nc/'. Cvsweb.openbsd.org. Retrieved 2013-08-11.
8. ^delphij (2005-02-06). 'Contents of /release/5.4.0/usr.bin/nc/Makefile'. Retrieved 2013-08-11.
9. ^Thomas Linden (2011-03-02). 'Netcat OpenBSD Cygwin Port 1.10.2.3'. Daemon.de. Retrieved 2013-08-11.
10. ^'MacPorts Portfiles'. MacPorts. Retrieved 2013-08-11.
11. ^http://www.ibiblio.org/pub/micro/pc-stuff/freedos/files/distributions/1.2/repos/pkg-html/group-net.html
12. ^http://www.bttr-software.de/products/jhoffmann/
13. ^https://nmap.org/ncat/
14. ^Andreas Bischoff (2010-06-07). 'Netcat 4 wince'. Dr-bischoff.de. Retrieved 2013-08-11.
15. ^'Revision 772: /trunk/data/netcat'. Telesphoreo.org. 2008-08-18. Retrieved 2013-08-11.
16. ^'socat - Multipurpose relay'. Dest-unreach.org. 2013-05-26. Retrieved 2013-08-11.
17. ^'Socat security advisory 7'. Dest-unreach.org. Retrieved 27 December 2017.
18. ^'Socat slams backdoor, sparks thrilling whodunit'. Theregister.co.uk. Retrieved 27 December 2017.
19. ^'Socat security advisory 7'. Dest-unreach.org. Retrieved 27 May 2018.
20. ^'CryptCat Project'. Cryptcat.sourcegorge.net. 2005-10-18. Retrieved 2013-08-11.
21. ^'Ncat - Netcat for the 21st Century'. Nmap.org. 2009-07-08. Retrieved 2013-08-11.

External links[edit]

• nc(1) – Linux User Commands Manual